SR-610 2018-10-22T15:36:12+08:00

Project Description

KEYENCE    SR-610  in  stock

Model SR-610
Type Middle-range
Laser pointer Light source Visible semiconductor laser (wavelength: 660 nm)
Output 90 µW
Pulse duration 200 µs
Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10)*1*2
Lights Light source High-intensity red LED
Reading Supported codes Barcode GS1 Databar; CODE39; ITF; Industrial 2 of 5; NW-7 (Codabar); JAN, EAN, UPC; CODE128; COOP 2 of 5; CODE93
2D code QR code, Micro QR code, DataMatrix, PDF417, MicroPDF417, MaxiCode, composite symbol (Composite Component)
Minimum resolution Barcode 0.127 mm 0.005″
2D code 0.25 mm 0.01″
Reading distance (typical examples) DataMatrix 40 mm to 173 mm 1.57″ to 6.81″ (cell size: 0.508 mm 0.02″)
QR 35 mm to 188 mm 1.38″ to 7.40″ (cell size: 0.508 mm 0.02″)
Barcode 44 mm 1.73″ to 205 mm 8.07″ (narrow bar width: 0.508 mm 0.02″)
Focal point 100mm 3.94”
Reading view range (at the focal length) 70.6 mm 2.78″ x 45.0 mm 1.77″
Reading time (Typical) 21 ms (focal length for 21 × 21 QR codes)
Terminal block Input Number of inputs 2 (IN1 and IN2)
Input type No-voltage input
Output Number of outputs 4 (OUT1, OUT2, OUT3, and OUT4)
Output type NPN open collector
Rated load 24 VDC, 30 mA
Leakage current when OFF 0.1mA or less
Residual voltage when ON 0.8V or less
I/O specifications Serial interface Communication method Conforms to EIA RS-232C
Communication speed 9600, 19200, 38400, 57600, 115200 bps
Synchronization between the transmitter and receiver Asynchronous
Data bit length 7 or 8 bits
Stop bit length 1 bit or 2 bits
Parity check None, odd, even
USB Conforms to USB 2.0 Full Speed
Rating Power voltage 5 VDC +5 %, -10 %
Current consumption 630 mA or less*3
Environmental resistance Enclosure rating IP65
Ambient light Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux
Operating environment No dust or corrosive gases present
Ambient temperature 0 to +45 °C 32 to 113 °F
Storage temperature -10 to +50 °C 14 to 122 °F
Relative humidity 35 to 95 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 3 hours in each of the X, Y, and Z directions
Weight Approx. 160 g
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*2 Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1.
*3 In order to conform with UL/IEC60950-1, use a Limited Power Source defined by UL/IEC60950-1.

If  you  want to buy it,sent an inquiry to us