1/16 DIN Process controller setpoint programmer

– Panel mount controller 48×48 mm
– 1 Configurable input, 1 auxiliary input and 2 digital inputs
– Up to 3 Digital outputs and 1 analogue output
– PID single action or double action (Heat/Cool)
– Floating servomotor
– 16 segment programmer (optional)
– RS 485 ModBus RTU port (optional)
– 2 display lines, 4 digits each, green colour

Process inputs:

1 Universal input

– Thermocouples: J, K, L, S, T, R
– RTD: Pt100
– Voltage (V): 0/1…5 V, 0…10V
– Voltage (mV): 0/10…50 mV
– Current (mA): 0/4…20 mA
– Custom linearisation and IR probes (J.K type)
Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)

Auxiliary input(Optional)

– Voltage (V):  0/1…5 V, 0…10V
– Current (mA): 0/4…20 mA
– 1 current transformer input for load monitoring (optional) 50 or 100 mA jumper selectable
– Potentiometer: 100Ω … 10 kΩ

2 digital inputs

– Free Voltage

Keyboard

Mechanical: 6 multifunction keys

Process outputs

1 High level analogue output(optional):

– For process control
– For PV/SP retransmission
– Current (mA): 0/4…20 mA

Up to 3 Digital outputs

OUT1
– RELAY SPST-NO, 2A/250Vac
– TRIAC 1A 250 VAC
OUT2 
– RELAY SPST-NO, 2A/250Vac
– TRIAC 1A 250 VAC
OUT3
– RELAY SPST-NO, 2A/250Vac
– TRIAC 1A 250 VAC

Power supply:

– 24VDC/VAC
– 100… 240 Vac (50/60 Hz)
Transmitter power supply: 18 Vdc ±20%, 30 mA Max

Functions

– ON/OFF control
– PID single action or double action (Heat/Cool)
– Floating servomotor
– Auto/Man station with bumpless action
– Remote setpoint
– 2 memorized setpoints
– 16 segment programmer (optional)

Autotuning

– Autotuning with natural frequency
– Autotuning with step response
– Adaptive Autotuning

Alarms

– Up to 4 configurable alarms

Communication and programming:

Interfaces

– RS 485 port with ModBus RTU and J-bus (slave) protocols (optional)

Programming/configuration tools:

– Fast View for immediate and easy access to 10 selectable parameters
– Easy to use front interface for configuration
– Configuration software available for PC

Installation

Mounting method: panel mount
Case dimensions: 48 x 48 mm (1/16 DIN)

Connections

Signals connection
18 poles 5.5 mm² screw terminals block
Protection factor: IP 65 front protection

Display and indicators

2 Display lines, 4 digits (PV) h: 10 mm, 4 digits (SP/OP) h 8 mm, green colour
3 LED Bargraph + 2 Alarm and 1 Transmission LEDs

Connectable to:

– SCADA for monitoring, traceability and remote management
– DX and DY gateways for remote monitoring