LS-H22 2018-10-23T17:51:08+08:00

Project Description

PANASONIC   LS-H22 in  stock

Item Specifications
Product Number LS-H22-C5
Part Number LS-H22-C5
CE marking directive compliance EMC Directive, RoHS Directive
Applicable amplifiers LS-401(P), LS-401(P)-C2, LS-403
Sensing range:U-LG mode 30 to 1,000 mm 1.181 to 39.370 in
Sensing range:STD mode 30 to 500 mm 1.181 to 19.685 in
Sensing range:FAST mode 30 to 300 mm 1.181 to 11.811 in
Sensing range:H-SP mode 30 to 300 mm 1.181 to 11.811 in
Operation indicator Orange LED (lights up when the amplifier output is ON)
Laser emission indicator Green LED (lights up during laser emission)
Spot-shape adjuster Multi-turn adjuster
Protection IP40 (IEC)
Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element:IEC / JIS / GB standards conforming type Red semiconductor laser,
Class 2 (IEC / JIS / GB)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Emitting element:FDA / IEC / JIS standards conforming type Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Material Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
Cable 0.1 mm2, single core two parallel shielded cables, 5 m 16.404 ft long
(Connector for amplifier attached)
(Note) Cable cannot be extended.
Accessory LS-MR1 Lens attachment for line reflective: 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance)

If  you  want to buy it,sent an inquiry to us

GET A QUOTE