Project Description
KEYENCE LR-TB2000C in stock
| Model | LR-TB2000C | |||
| Type | Cable with connector M12 | |||
| Detectable distance | 60 to 2000 mm 2.36″ to 78.74″*1 | |||
| Spot diameter | Approx. ø4 mm ø0.16″ | |||
| Response time | 1 ms/10 ms/25 ms/100 ms/1000 ms selectable |
|||
| Light source | Type | Red laser (660 nm) | ||
| Laser class | Class 2 laser product (IEC60825-1,FDA (CDRH) Part1040.10*2) |
|||
| Mutual interference prevention function | 4 units (when using the interference prevention function) | |||
| Timer | OFF/OFF delay/ON delay/One-shot | |||
| Power voltage | 20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS | |||
| Current consumption | 45 mA or less (without load)*3 | |||
| I/O | Control output | NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable *4*5 |
||
| Analog output | – | |||
| Protection circuit | Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge | |||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp/Sunlight: 10,0000 lux or less | |||
| Ambient temperature | -20 to +55 °C -4 to 131 °F (No freezing) | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions | |||
| Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions | |||
| Material | Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC, M12 connector: TPE, PBT, Nickel-plated brass |
|||
| Accompanying items | Instruction manual, Laser warning and explanation labels |
|||
| Weight | Approx. 85 g | |||
| *1 The range for displayable distance is from 50 to 2200. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *3 145 mA or less (with load) *4 You can select the I/O from the following combinations. Control output × 2, control output + external input Control output + analog output (LR-TB5000/TB5000C/TB5000CL only) External input + analog output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) *5 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. |
||||
If you want to buy it,sent an inquiry to us