k85HERRR K85HCRRR K85LCRRR K85LERRR K85FERRR K85FCRRR K35HERRR K35HCRRR K35LERRR K35LCRRR K35LIRRR K35FERRR K35FCRRR K35FIRRR K35HCRRR K35HERRR K35HIRRR 2018-11-22T17:40:56+08:00

Project Description

ASCON tecnologic k85HERRR K85HCRRR K85LCRRR K85LERRR K85FERRR K85FCRRR K35HERRR K35HCRRR K35LERRR K35LCRRR K35LIRRR K35FERRR K35FCRRR K35FIRRR K35HCRRR K35HERRR K35HIRRR in  stock

K85

DIN Rail mount mini-programmer controller

  • Process inputs:
    1 input for temperature probes:
    – TC type: J, K, R, S, T
    – IR probes (J, K type)
    – RTD : PT100 IEC
    – PTC KTY81-121 (990 Ω @ 25 °C)
    – NTC 103AT-2 (10KΩ @ 25 °C)
    – Voltage (mV) signals :0…50 mV, 0…60 mV, 12 …60 mV
    – Voltage (V) signals :0..1 V, 0/1…5 V , 0/2…10 V
    – Current (mA) signals (shunt): 0/4…20 mA
    2 digital inputs:
    – Free Voltage
    Keyboard: Mechanical
  • Process outputs:
    Up to 3 digital outputs according to the model selection:
    – SPST-NO relay 8A
    – SSR drive output
  • Power supply:
    – 24 VAC/VDC
    – 110… 240 VAC (±10%) 50/60 Hz
    Auxiliary power supply for external transmitters (optional): 12 VDC /20 mA max.
  • Control functions
    Control strategies :
    – ON/OFF with neutral zone and Compressor protection time
    – PID single action or double action (Heat/Cool) with overshoot control
    Autotuning
    8 segment programmer with:
    – events recovery
    – 2 events
    – Guaranteed soak
    Independent timer with 4 functioning modes
    Wattmeter for calculating the instantaneous power and energy used
    Counter for days and hours worked with programmable threshold for programmed maintenance
    Start-up delay
    Soft start
    Bumpless ramp for set point change
    Up to 3 configurable alarms + loop break alarm
    Overall accuracy:
    ± (0,5 % span ± 1 digit @25 °C);
    Tc S: ± (1 % span ± 1 digit @ 25 °C)
  • Communication and configuration:
    Configurable Parameter list (promotion)
    – Serial communication port: RS485 Modbus-RTU Slave
    For PC configuration, supervision or connection to third party devices
    – Communication on TTL port to:
    – Universal programming key
    – Remote display
  • Dimensions:
    4 DIN Module 70 x 84 mm, depth 60 mm
    Connections:
    – 2.5 mm² screw terminals block
    IP40 front frame protection
    DIN Rail Mount
    1 red display  with 4 digits, h 12 mm, 3 LED Bargraph

If  you  want to buy it,sent an inquiry to us

GET A QUOTE