Project Description
ASCON tecnologic temprature controller K32ERRRR K32EORRR K32CORRR K32COORR TLK32ERRRR TLK32EORRR TLK32CORRR TLK32COORR in stock
- Panel mount controller 78 x 35 mm
- Available with “Sensitive Touch” keyboard
- 1 Configurable probe input
- 2 digital inputs
- Up to 4 digital outputs
– PID controller with:
* Independent timer
* 8 segment programmer (optional)
* Wattmeter
* Counter for worked days and hours
* Compressor protection timer - TTL or RS485 Modbus-RTU ports
- 2 display lines, 4 digit, h 7 mm, red and green colour
Process inputs:
1 temperature probe input
– Thermocouples: J, K, R, S,T
– PTC KTY81-121 (990 Ω @ 25 °C)
– NTC 103AT-2 (10KΩ @ 25 °C)
– RTD: Pt100
– Voltage (V): 0..1 V, 0/1…5 V , 0/2…10 V
– Voltage (mV): 0…50 mV, 0…60 mV, 12 …60 mV
– Current (mA): 0/4…20 mA
– Custom linearisation and IR probes (J,K type)
Overall accuracy: ± (0,5 % span ± 1 digit @25 °C); Tc S: ± (1 % span ± 1 digit @ 25 °C)
2 digital inputs
– Free Voltage
Keyboard
4 multifunction keys
– Mechanical:
– “Sensitive Touch”
Process outputs
Up to 5 outputs
OUT1
– RELAY SPDT, 8A
– SSR Drive
OUT2
– RELAY SPDT, 8A
– SSR Drive
OUT3/OUT4
– RELAY SPST-NO, 5A
– SSR Drive
Power supply:
– 12 VAC/VDC
– 24 VAC/VDC
– 100… 240 VAC (50/60 Hz)
Transmitter power supply: 10 VDC (±10%), 20 mA max.
Functions
– ON/OFF control with neutral zone
– PID single action or double action (Heat/Cool) with overshoot control
– Bumpless ramp to set point change
– Start-up delay
– Independent timer with 5 functioning modes (optional)
– Setpoint change from digital inputs
– Digital Setpoint retransmission (Note 1)
– Up to 4 memorized setpoints
– 8 segment programmer with events recovery, 2 events and guaranteed soak (optional)
– Wattmeter for calculating the instantaneous power and energy used
– Counter for days and hours worked
with programmable threshold for programmed maintenance
– Compressor protection timer
Autotuning
– Adaptive Autotuning
– Oscillatory
– Fast
Alarms
– Up to 4 configurable alarms + loop break alarm
Communication and programming:
Interfaces
Communication on TTL port to:
– Universal programming key
– Remote display
– RS 485 serial interface
RS 485 port with ModBus RTU protocol (optional)
Programming/configuration tools:
– Configurable parameter level “Promotion”
– Configuration software available for PC
Installation
Mounting method: panel mount
Case dimensions: 78 x 35 mm, depth 75.5 mm
Connections
Communication port connection
5 Pole TTL Port
Connection
24 poles 2.5 mm² screw terminals block
Front protection: IP65 front frame protection, with gasket and screw brakets
Display and indicators
2 display lines, 4 digit, h 7 mm, red and green colour
Connectable to:
– Programming key A01 for PC connection, backup and other functions
– SCADA for monitoring, traceability and remote management
– DX and DY gateways for remote monitoring
Notes
1) Digital Setpoint retransmission available only with RS485 port option or external adapter from TTL
If you want to buy it,sent an inquiry to us