GT2-A12 2018-10-22T17:37:54+08:00

Project Description

KEYENCE    GT2-A12  in  stock

Model GT2-A12
Detection system Quartz glass scale, CMOS image sensor projection system, Absolute type (without tracking error)
Measuring range 12 mm 0.47″
Resolution 0.5 μm 0.02 Mil
Indicated accuracy 2 µm 0.08 Mil (p-p)*1
Measuring force Downward mounting 1.2 N*2
Side mounting 1.1 N*2
Upward mounting 1.0 N*2
Sampling cycle 1 ms
Fluid used Dry air
Operation indicator light 2-color LED (red, green)
Environmental resistance Enclosure rating IP67*3
Pressure resistance 1 MPa
Applied pressure range 0.25 to 0.5 MPa
Ambient temperature 0 to +55 °C 32 to 131 °F (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
Shock resistance 1,000 m/s2 (IEC60068-2-27)
Materials Main body Main body case: Zinc die-casting; Cylinder part: Aluminium alloy;
Air joint resin part: Polyacetal; Air joint metal part: Brass nickel plating; Indicator: Polyarylate
Dust boot NBR
Contact TYPE304, 440C Stainless steel*4
Sensor head cable Optional (connect to the M8 connector)
Weight Approx. 145 g (excluding cable)
*1 Value when the ambient temperature is 20 °C 68 °F.
*2 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots.
*3 Make sure the air tube is connected to the air exhaust joint and that no foreign materials enter inside from the joint.
*4 The contact is included with the sensor.

If  you  want to buy it,sent an inquiry to us

GET A QUOTE