FD-40A 2018-09-20T16:33:22+08:00

Project Description

KEYENCE    FD-V40A  in  stock

Model FD-V40A*1
Type DIN type
Current consumption. At 12 V Normal 1500 mW (125 mA) or less
Eco mode 1320 mW (110 mA) or less
At 24 V Normal 2000 mW (83 mA) or less
Eco mode 1700 mW (70 mA) or less
Detection range FD-A1: 30 to 1,000 mL/min (std)
FD-A10/A10AR: 0.3 to 10 L/min (std)
FD-A50/A50AR: 1.5 to 50 L/min (std)
FD-A100/A100AR: 3 to 100 L/min (std)
FD-A250: 7 to 250 L/min (std)
FD-A600: 18 to 600 L/min (std)
Display power 3 digit two-color 7-segment LED (Upper characters: red, Lower characters: green), Display Update Cycle: 5 times/sec.
Operation status indicators Red LED x 2 (Control output 1/control output 2), Green LED (Integration display)
Resolution FD-A1: 1 mL
FD-A10/A10AR: 0.01 L
FD-A50/A50AR/A100/A100AR: 0.1 L
FD-A250/A600: 1 L
Hysteresis Variable
Response time (chatter prevention feature) Select from HSP (5 ms), 0.02, 0.1, 1 and 5 seconds.
Integrated sampling cycle 30 ms
Integrated data memory Writes in memory every minute
Accumulated flow unit FD-A1: Selectable from 1, 10, 100, 1,000, 10,000 (mL)
FD-A10/A10AR: Selectable from 0.01, 0.1, 1, 10, 100 (L)
FD-A50/A50AR: Selectable from 0.1, 1, 10, 100, 1,000 (L)
FD-A100/A100AR: Selectable from 0.1, 1, 10, 100, 1,000 (L)
FD-A250/A600: Selectable from 1, 10, 100, 1,000, 10,000 (L)
Integration reset input No-voltage input (with contacts, without contacts), Input time 20 ms min. (Analog output/selectable)
Control output/integration pulse output NPN open collector Max. 100 mA. 40 V or lessResidual voltage 1 V or less, 2 outputs (N.O./N.C. selectable)Residual voltage 1 V or less, 2 outputs (N.O./N.C. selectable)
Analog output 4 to 20 mA, Maximum load resistance 260 Ω
Repetition accuracy FD-A1/A10/A10AR/A50/A50AR/A100A/100AR: ±0.5 % of F.S. or less
FD-A250/A600: ±1 % of F.S. or less
(at the operating ambient temperature of 25 °C)
Rating Power voltage 12 to 24 VDC, Ripple (P-P) 10 % or less
Environmental resistance Ambient temperature 0 to +50 °C 32 to 122 °F (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 3 hours in each of the X, Y, and Z axis
Material Housing material: Polycarbonate, Key top: Silicon rubber
Accessories Mounting bracket, Power cable, Instruction manual
Weight Approx. 85 g (including power cable)
*1 The amplifiers, whose model names have “A” or “AP” in the end, are upgraded ones along with the supplementation of a new head. The old type of amplifiers, whose model names do not have “A” or “AP”, cannot be used with the sensor heads other than FD-A10/A50/A100.

If  you  want to buy it,sent an inquiry to us

GET A QUOTE