Project Description
KEYENCE BL-1301 in stock
| Model | BL-1301 | |||
| Type | Standard type | |||
| Type | Reading direction | Front | ||
| Scanning method | Raster | |||
| Laser | Light source | Visible semiconductor laser (wavelength: 660 nm) | ||
| Control output | 85 µW | |||
| Pulse duration | 112 µs | |||
| Laser class | Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1) | |||
| Reading | Supported codes | CODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBar | ||
| Number of readable digits | 74 digits (148 digits for CODE128 with start character C) | |||
| Readable bar width | 0.125 mm0.005″ | |||
| Reading distance | 65 to 500 mm 2.56″ to 19.69″*2 (narrow bar width 1.0 mm 0.04″) | |||
| Focal point | 120 mm 4.72″ | |||
| Largest readable label width | 339 mm 13.35″*2 (distance: 350 mm 13.78″, narrow bar width: 1.0 mm 0.04″) | |||
| PCS | 0.4 or more | |||
| Scanning rate | 500 to 1,300 scans/sec. (in units of 100 scans) | |||
| I/O specifications | Input terminals | Number of inputs | 2 (IN1 and IN2) | |
| Input format | No-voltage input | |||
| Output terminals | Number of outputs | 4 (OUT1, OUT2, OUT3, and OUT4) | ||
| Output | NPN open collector | |||
| Rated load | 24 VDC, 30 mA | |||
| Leakage current (at OFF) | 0.1 mA or less | |||
| Residual voltage (at ON) | 0.5 V or less | |||
| Serial interface | Communication method | Conforms to EIA RS-232C | ||
| Communication speed | 600, 1,200, 2,400, 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps | |||
| Synchronization between the transmitter and receiver | Asynchronous | |||
| Data bit length | 7 or 8 bits | |||
| Stop bit length | 1 bit or 2 bits | |||
| Parity check | None, odd, even | |||
| Rating | Power voltage | 5 VDC ±5 % | ||
| Voltage consumption | 400 mA or less | |||
| Environmental resistance | Enclosure rating | IP65 | ||
| Ambient light | Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux | |||
| Operating environment | No dust or corrosive gases present | |||
| Ambient temperature | 0 to +45 °C 32 to 113 °F | |||
| Storage temperature | -20 to +60 °C -4 to 140 °F | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions | |||
| Weight | Approx. 115 g | |||
| *1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Specifications for 500-scan/second operation Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. Internal body settings are written in the internal memory area (can be rewritten 100,000 times). |
||||
If you want to buy it,sent an inquiry to us