KEYENCE LR-TB5000 in stock
|Detectable distance||60 to 5000 mm 2.36″ to 196.85″*1|
(use a spot diameter of 40 mm 1.57″ or less)
|Response time||1 ms/10 ms/25 ms/100 ms/1000 ms
|Light source||Type||Red laser (660 nm)|
|Laser class||Class 2 laser product
(IEC60825-1,FDA (CDRH) Part1040.10*2)
|Mutual interference prevention function||4 units (when using the interference prevention function)|
|Timer||OFF/OFF delay/ON delay/One-shot|
|Power voltage||20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS|
|Current consumption||50 mA or less (without load)*3|
|I/O||Control output||NPN open collector/PNP open collector selectable
30 VDC or less, 50 mA or less, residual voltage: 2 V or less,
|Analog output||Current output/Voltage output selectable
Current output: 4 to 20 mA with a max. load resistance of 500 Ω
Voltage output: 0 to 10 V with an external load resistance of 5 kΩ or more
|Protection circuit||Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge|
|Environmental resistance||Enclosure rating||IP65/IP67 (IEC60529)|
|Ambient light||Incandescent lamp/Sunlight: 10,0000 lux or less|
|Ambient temperature||-20 to +55 °C -4 to 131 °F (No freezing)|
|Relative humidity||35 to 85 % RH (No condensation)|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions|
|Shock resistance||1,000 m/s2, 6 times in each of the X, Y, and Z directions|
|Material||Case: Zinc die cast (Nickel chrome plating),
Indicator cover and buttons: PES,
Lens cover and display: PMMA (scratch-resistant coating specifications),
Cable bushing: PBT,
|Accompanying items||Instruction manual,
Laser warning and explanation labels
|Weight||Approx. 200 g (Including cable)|
|*1 The range for displayable distance is from 50 to 5200.
*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*3 150 mA or less(with load)
*4 You can select the I/O from the following combinations.
Control output × 2, control output + external input
Control output + analog output (LR-TB5000/TB5000C/TB5000CL only)
External input + analog output (LR-TB5000/TB5000C/TB5000CL only)
(For details on the setting method, see the instruction manual.)
*5 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com).
If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.
If you want to buy it,sent an inquiry to us