LS-403 2018-10-27T16:46:37+00:00

Project Description

PANASONIC    LS-403  in  stock

Item Specifications
Product Number LS-403
Part Number LS-403
Operation indicator Orange LED (lights up when output 1 and output 2 are ON)
Laser emission indicator Green LED (lights up during laser emission)
Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min.
between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Material Enclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
Cable
(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft)
Weight Net weight: 15 g approx
Gross weight: 20 g approx
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
Outputs(Output 1, Output 2) NPN open-collector transistor
– Maximum sink current: 50 mA (Note)
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 1.5 V or less [at 50 mA (Note) sink current] (Note) 25 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Outputs(Output 1, Output 2):Output operation Selectable either Light-ON or Dark-ON, with jog switch
Outputs(Output 1, Output 2):Short-circuit protection Incorporated
Response time 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
External input(Laser emission halt Full-auto teaching / Limit teaching)
Select indicator Yellow LED
(lights up when either output 1 or output 2 is selected)
MODE indicator RUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
Digital display 4 digit (green) + 4 digit (red) LED display
Sensitivity setting Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 8-level settings
Fine sensitivity adjustment function Incorporated
Timer function Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
Timer function:Time 0.5 to 9,999 ms
Automatic Interference prevention function Incorporated[Up to four sets of sensor heads can be mounted close together. (Up to two sets when in H-SP mode)]
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.

If  you  want to buy it,sent an inquiry to us

GET A QUOTE