FPOR-C32CT 2018-10-29T16:58:19+00:00

Project Description

PANASONIC   FP0R-C32CT  in  stock

Item Specifications
Product Number AFP0RC32CT
Part Number AFP0RC32CT

 

Performance specifications

Item Specifications
Programming method / Control method Relay symbol / Cyclic operation
Number of I/O points : No expansion (Control unit only) 32 points[Input : 16, Transistor output : 16]
Number of I/O points : With expansion 1
Same type of control and expansion units
Max. 128 points (Note: For the limitations while operating units, reter to the manual.)
Number of I/O points : With expansion 2
Mix type of relay and transistor units
Max. 128 points (Note: For the limitations while operating units, reter to the manual.)
Program memory EEPROM (no backup battery required)
Program capacity 32 k steps
Number of instructions : Basic 110 approx.
Number of instructions : High-level 210 approx.
Operation speed : Up to 3,000 steps Basic instructions : 0.08 μs min. Timer instructions : 2.2 μs min.
High-level instructions : 0.32 μs (MV instruction) min.
Operation speed : 3,001st and later steps Basic instructions : 0.58 μs min. Timer instructions : 3.66 μs min.
High-level instructions : 1.62 μs (MV instruction) min.
Operation memory : Relay : Internal relay (R) 4,096 points
Operation memory : Relay : Timer / Counter (T / C) 1,024 points
Operation memory : Memory area : Data register (DT) 32,765 words
Operation memory : Memory area : Index register (IX, IY) 14 words (IO to ID)
Master control relay points (MCR) 256 words
Number of labels (JMP and LOOP) 256 labels
Differential points Equivalent to the program capacity
Number of step ladder 1,000 stages
Number of subroutines 500 subroutines
Special functions : High speed counter Single-phase: 6 points (50 kHz max. each) 2-phase: 3 channels (15 kHz max. each) (Note: For the limitations while operating units, reter to the manual.)
Special functions : Pulse output 4 points (50 kHz max. each) 2 channels can be controlled individually. (Note: For the limitations while operating units, reter to the manual.)
Special functions : PWM output 4 points (6 Hz to 4.8 kHz)
Special functions : Pulse catch input / interrupt input Total 8 points (with high speed counter)
Special functions : Interrupt program Input : 8 programs (6 programs for C10 only)
/ Periodic : 1 program / Pulse match : 4 programs/td>
Special functions : Periodical interrupt In units of 0.5 ms : 0.5 ms to 1.5 sec. / In units of 10 ms : 10 ms to 30 sec.
Special functions : Constant scan In units of 0.5 ms : 0.5 ms to 600 ms
Special functions : RS-232C port One RS-232C port is mounted
(3P terminal block) Transmission speed (Baud rate) : 2,400 to 115,200 bits/s, Transmission distance : 15 m 9.843 ft. Communication method : half duplex
Maintenance : Memory backup : Program and system register Stored program and system register in EEPROM
Maintenance : Memory backup : Operation memory Stored fixed area in EEPROM
Counter : 16 points
Internal relay : 128 points
Data register : 315 words
Maintenance : Self-diagnostic function Watchdog timer (690 ms approx.), Program syntax check
Maintenance : Real-time clock function Not available
Maintenance : Other functions Rewriting in RUN mode, Download in RUN mode (incl. comments),
8-character password setting, and Program upload protection

 

General specifications

Item Specifications
Rated voltage 24 V DC
Operating voltage range 20.4 to 28.8 V DC
Allowed momentary power off time 10 ms (20.4 V DC or higher)
Operating temperature 0 to +55 ℃ 32 to +131 ℉
Storage temperature -40 to +70 ℃ -40 to +158 ℉ (-20 ℃ to +70 ℃ -4 to +158 ℉ for T32 only)
Operating humidity 10 to 95% RH (at 25 ℃ 77 ℉, no condensation)
Storage humidity 10 to 95% RH (at 25 ℃ 77 ℉, no condensation)
Breakdown voltage (Detection current: 5 mA) Input terminals – output terminals, Output terminals – power and functional ground terminals — Transistor output : 500 V AC for 1 minute (Relay output : 1,500 V AC for 1 minute) /
Input terminals – power and functional ground terminals, Functional ground terminal – power terminal — Transistor output : 500 V AC for 1 minute (Relay output : 500 V AC for 1 minute) /
Output terminals – output terminals (different common terminals) — Relay output : 1,500 V AC for 1 minute
Insulation resistance (Test voltage: 500 V DC) Input terminals – output terminals, input terminals – power and functional ground terminals, output terminals – power and functional ground terminals, functional ground terminal – power terminal — Transistor output : 100 MΩ minimum (relay output : 100 MΩ minimum) /
Output terminals – output terminals (different common terminals) — Relay output : 100 MΩ minimum
Vibration resistance 5 to 9 Hz, single amplitude of 3.5 mm, 1 sweep/min; 9 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min; for 10 min each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 4 times each in X, Y, and Z directions
Noise immunity 1,000 V (p-p) with pulse widths 50 ns and 1 μs (using a noise simulator)(Power supply terminal)
Operating environment Free from corrosive gasses and excessive dust

 

Input specifications

Item Specifications
Rated input voltage 24 V DC
Applied voltage range 21.6 to 26.4 V DC
Rated input current 2.6 mA approx. (at 24 V DC)
Input impedance 9.1 kΩ approx.
Input points per common 16 points / common
Min. ON voltage/Min. ON current 19.2 V / 2 mA
Max. OFF voltage/Max. OFF current 2.4 V / 1.2 mA
Response time : OFF→ON 20 μs or less * An input time constant (0.1 to 64 ms) can be set.
Response time : ON→OFF Same as above
Insulation method Photocoupler
Remark Since the response time of X0 to X7 is very fast (for high-speed counter input) the FP0 happens to chattering noise as an input signal. To prevent this, it is recommended that the timer should be put in the ladder program.

 

Output specifications

Item Specifications
Output type Open collector
Rated load voltage 5 to 24 V DC
Load voltage allowable range 4.75 to 26.4 V DC
Max. load current 0.2 A / point (Max. 14 per common terminal)
OFF state leakage current 1 μA or less
ON state voltage drop 0.2 V DC or less
Response time : OFF→ON 20 μs or less (Load current : 5 mA or more), 0.1 ms or less (Load current : 0.5 mA or more)
Response time : ON→OFF 40 μs or less (Load current : 5 mA or more), 0.2 ms or less (Load current : 0.5 mA or more)
External power : Voltage 21.6 to 26.4 V DC
External power supply : Current 60 mA or less
Surge absorber Zener diode
Output points per common 16 points / common
Insulation method Photocoupler

If  you  want to buy it,sent an inquiry to us

GET A QUOTE