EX-22A 2018-10-29T17:15:15+00:00

Project Description

PANASONIC   EX-22A  in  stock

Spec Detail

Item Specifications
Product Number EX-22A
Part Number EX-22A
CE marking directive compliance EMC Directive, RoHS Directive
Sensing range 5 to 160 mm 0.197 to 6.299 in (Note) with white non-glossy paper (200 x 200 mm) (7.874 x 7.874 in)
(Note) In case of using this product at a sensing range of 50 mm 1.969 in or less, take care that the sensitivity adjustment range becomes extremely narrow.
Sensing object Opaque,translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis 15 % or less of operation distance [200 x 200 mm 7.874 x 7.874 in with white non-glossy paper]
Repeatability(perpendicular to sensing axis) 0.3 mm 0.012 in or less
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption 13 mA or less
Output NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category DC-12 or DC-13
Output:Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster Continuously variable adjuster
Operation mode switch
Protection IP67 (IEC)
Ambient temperature -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Red LED (modulated)
Emitting element:Peak emission wavelength 680 nm 0.027 mil
Material Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Weight Net weight: 20 g approx
Gross weight: 45 g approx
Accessory Adjusting screwdriver: 1 pc

If  you  want to buy it,sent an inquiry to us

GET A QUOTE